Why is my wireless dog collar not working?
Batteries are out. If there is no working battery inside the collar, the receiver will not work and it won’t deliver a static correction. Always keep a spare, loaded battery around the house.
Why is my underground fence not working?
Check for a break in the underground wiring of the invisible fence. Most invisible fence units register an error if there is a break in the fence. It should either flash red lights or set off an alarm. Remove the ends of the fence wire from the transmitter jacks and replace them with the ends of a spare piece of wire.
How do I know if my invisible fence collar is working?
Touch both points on the collar while it is ticking or beeping. If you do not feel a shock, then there may be a problem with the receiver collar. Make sure you touch both points on the receiver at the same time when you hear the collar beeping. It will tell you definitively that the fence is or is not working.
How do you test a dog’s extreme fence collar?
How are you testing the collar? To test it properly, you must approach the fence in one place, then go back into the center of the yard and walk back out to another spot. Walking parallel in the beep zone will not cause the collar to activate again. You have to walk in and then back out again to test.
How do I reset my wireless dog fence?
Resetting the system can be as simple as replacing the batteries in your transmitter. Bring your dog inside, and turn off the power to the fence. Unplug the transmitter. Look for metal objects around or on top of the fence.
How do I turn my invisible fence collar on?
Adjust the Power Level After checking the current level, press the button again within 5 seconds to raise the correction level. The collar will beep or blink in series to indicate the new shock level. Press the button again within 5 seconds to raise the level once more.
Why is my electric fence collar not working?
My pet’s Invisible Fence collar doesn’t activate at the boundary, what is wrong? Ensure that your pet’s Computer Collar receiver is fitted properly to his neck. The collar should be snug enough to slide only one finger between a correction post and your pet’s skin.
How do you test a pet shock collar?
All you have to do is hold the tool against the contact points on your dog or cat’s receiver collar to check if the collar is working properly. The test light tool will light up if static correction is being activated. This accessory comes in most kits including a fence receiver collar, remote trainer, or bark collar.
